UniSpeed 5
Machine no.:
3220
Driveways:
X = 2,000 mm
Y = 1,300 mm
Z = 1,300 mm
Control:
Heidenhain iTNC 530
Year of construction:
2006
X-way
2,000 mm
Y-path
1,300 mm
Z-path
1,300 mm
Control system
Heidenhain iTNC 530
Condition
Used
Tool holder
SK 50
Second-hand machine SHW-UniSpeed 5, machine number 3220, year of manufacture 2006
Basic machine with the travel paths:
Machine stand horizontal-longitudinal X = 2,000 mm
Headstock slide vertical Y = 1,300 mm
Headstock horizontal-transverse Z = 1,300 mm
Machine stand
In a compact, torsion-resistant welded construction.
Three hardened compact roller guides guarantee the transmission of high cutting performance with consistent quality.
Protected against chips and cooling water with covers.
Headstock slide
In cast design with hydraulic weight compensation, guided on the machine frame with hardened compact roller guides.
Machine frame
Intrinsically rigid design in Hydropool composite construction as the basis for dynamic and vibration-damped movement of the machine column in the X-axis.
Complex foundations are not required.
Compact roller guides ensure maximum precision.
Motor-driven CNC built-in rotary table
– Clamping surface mm Ø 1,600
– 8 longitudinal grooves mm 22 H12 DIN 650
– 2 alignment grooves lengthwise and crosswise through center mm 22 H7 x 10 deep
– T-slot spacing mm 160
– Centering bushing mm Ø 50 H7 x 20 deep
– Concentricity of the bushing mm 0.010
– Axial run-out accuracy at Ø 1000 mm 0.020
– Mechanical part accuracy over
direct measuring system sec ± 4
– Speed max.
1/min 5
– Tilting moment clamped Nm 60,000
– Tangential torque clamped Nm 26,000
for circular milling Nm 5,000
– Table load (centric) max.
kg 6.000
– max.
Swing diameter of the workpiece 2300 mm
Automatic tool changer
– Chain magazine for tools 48
– max.
Tool diameter with filled magazine mm 125
– with free neighboring spaces mm 250
– max.
tool length mm 400
– max.
Tool weight kg 25
– max.
Tool load torque Nm 40
– Tool holder SK 50 DIN 69871
– pure tool change time approx. sec 10
– Horizontal spindle position during tool change
– Fixed location coding
– The spindle taper is blown out with compressed air
With every tool change
Headstock with automatic universal milling head (UFK)
consisting of:
– Milling head holder, automatically swivels 360 x 1 degree
– Milling head, automatically swivels 180 x 1 degree
– 64,800 different positions can therefore not only be approached via the CNC control, but also programmed and processed.
– Repeat accuracy at the spindle nose ± 0.002 mm, partial accuracy therefore ± 3 sec
– Tool holder SK 50 DIN 69871
– The milling spindle is equipped with a hydromechanical quick tool clamping system
– Tool pull-in force: 20 kN
– The main drive power is provided by a frequency-controlled, liquid-cooled
AC motor with 30 kW at 100% ED or 41 kW at 40% ED
– to 36 to max.
6,000 1/min
Diagram E 741.0417.183
Individual digital feed drives
for contour-accurate work over AC motors with constant torque, feed and rapid traverse range in all 3 axes infinitely variable from 2- 30,000 mm/min.
Acceleration behavior of the individual axes 2 m/s²
Central condition
Integrated CNC control in the machine control panel, swivel-mounted on the support arm.
CNC control Heidenhain iTNC 530
Measuring systems
Direct non-contact measurement via linear measuring systems for high-precision manufacturing.
Electrical equipment
In accordance with EN 60204, VBG 4 for 400/230 V(± 10%) 3 phases, 50 HZ
Control voltage 24 V, total connected load approx. 50 kVA, 80 A.
The separate control cabinet contains the control units for the main spindle and feed motors as well as the freely programmable adjustment control and the switchgear for the additional units.
Protection class of the control cabinet, the feed motors and the main motor IP 54.
The machine and control cabinet are connected to each other via plug connectors.
Lubrication
Guideways: Impulse centralized lubrication
Main spindle: Permanent grease lubrication
Paintwork
Machine and control cabinet, RAL 7035, light gray
Milling head and headstock, RAL 5021, water blue
DD textured coating, silk gloss, oil and soda resistant
Workspace cladding
2 angled sliding doors on the front and roof.
Rear wall of the machine stand with protective cover
1 viewing window on the side of the machine frame.
Energy connection
400 V, 3 phases, 50 Hz, 50 kVA, 125 A slow-blow fuse, compressed air 4-6 bar (filter pressure regulator with pressure gauge and condensate separator on the machine, connection G ¼)
Reinforced coolant system
For coolant supply via nozzle ring, can be switched to internal coolant supply for tools with steep taper DIN 69871 AD, incl.
Compact paper belt filter system for cleaning the coolant.
Adjustable pressure-quantity control via bypass valve, two-stage switchable via CNC control.
Pump capacity: 32 1/min at max.
20 bar
Coolant tank, capacity 500 l
Chip conveyor
For travel distance X = approx. mm 2000
Feed width approx. mm 350
Discharge height approx. mm 1,250
External electronic handwheel (HR 410)
Switchable to 3 axes
(with corresponding machine guidance up to 5 axes, not for uni-head axes)
Collision monitoring system 1-channel
Monitors machine and conditional tool collision
Downloads: