Machine no.:
5279
Driveways:
X = 8000 mm
Y = 1600 mm
Z = 1300 mm
Control:
SIEMENS Sinumerik 840D pl
Year of construction:
2013
X-way
8000 mm
Y-path
1600 mm
Z-path
1300 mm
Control system
SIEMENS Sinumerik 840D pl
Condition
very good (used)
Tool holder
HSK 100-A
Used machine PowerSpeed 5C
Year of construction 2013
Control system: SIEMENS Sinumerik 840D pl
HSK 100-A tool holder
PROCEDURES
horizontal-longitudinal X = 8,000 mm
Headstock slide vertical Y = 1,600 mm
Headstock horizontal-transverse Z = 1,300 mm
RADIO METER: m&h HSK 100
SIEMENS HANDHELD CONTROL UNIT B-MPI
TRAVELING WORK PLATFORM
3-SIDED SPLASH AND CHIP PROTECTION WALL
LATE SUPPORTERS
CLAMPING PLATE
25 sqm Clamping plate including alignment elements with T-slots 22 H12, DIN 650, T-slot spacing 160 mm, clamping surface accuracy grade 1, DIN 876
Sizes: Length: 10,000 mm Width: 2,500 mm
WASHING GUN IN THE WORKROOM
REINFORCED COOLANT SYSTEM
Coolant device for the coolant supply, optionally switchable from external coolant supply (shower ring) to internal coolant supply (IK), DIN69871-AD, incl. compact filter system and double switch filter for cleaning the coolant.
Compact filter system and double switching filter for cleaning the coolant.
Frequency-controlled high-pressure pump with infinitely variable pressure/volume control via potentiometer in the control panel.
Pump capacity: 32 l/min at max.
20 bar Coolant tank: 2000 l
COLLISION MONITORING SYSTEM 2 CHANNEL pcs.
2 monitoring channels:
– 1. collision monitoring orthogonal milling head (channel 1)
– 2. collision monitoring fork head (channel 2)
PENDULUM MACHINING 3 WORK AREAS
MEASUREMENT INTERPOLATION FOR FREE FORM SURFACE (TRAORI, 3D tool radius compensation, spline interpolation)
ROTATED AXIS COORDINATE SYSTEM The rotated coordinate system is only valid for the basic machine position.
During machining, the coordinate system rotates depending on the alignment of the infeed axis (Z-axis)
2 PICK-UP STATION
For fork head, arranged on clamping plate Storage locations 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring location Tool holder HSK 6
AUTOMATIC TOOL CHANGER
Number of tools in the chain magazine 48
Maximum tool diameter with mm 125 filled magazine
Maximum tool diameter with mm 250 free neighboring spaces
Maximum tool length mm 500 – Maximum tool weight kg 25
Maximum tool load torque Nm 40
HSK 100-A tool holder
HEAD CHANGE MAGAZINE
1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE
AUTOMATIC CLEVIS WITH INTEGRATED HIGH-FREQUENCY SPINDLE
– High-frequency milling spindle:
– Built-in high-frequency spindle
– Tool holder HSK – A 63 DIN 69893
– Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED
– Speed range up to 20,000 rpm
– Motor spindle bearing with permanent grease lubrication
– Air barrier seal
– Torque: 40 Nm at 100% ED, 50 Nm at 40% ED
– Automatic tool clamping
– Power transmission according to speed/power diagram GMN HCS 170 – Technical data according to data sheet E 745.1467.00
UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN
– Liquid-cooled milling head
– Cast construction made of GGG 60
– Milling head, automatically swivels 180 x 1 degree
– The resulting positions can therefore not only be approached via the CNC controller, but also programmed and processed
– Repeat accuracy at the spindle nose ±0.002 mm, partial accuracy therefore ±3 sec
– Tool holder HSK 100-A
– The milling spindle is equipped with a hydromechanical quick-action tool clamping system
– Tool pull-in force: 45 kN
– Internal coolant supply form A-D
– External coolant supply via shower ring
– Speed range 22- 4,000 1/min
MAIN DRIVE
by a frequency-controlled liquid-cooled AC motor with – 32 kW drive power at 100% ED, 46 kW at 40% ED.
Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox.
– 637 Nm torque at 100% ED, 875 Nm at 40% ED (see speed-performance diagram E 741.0417.186)
DOCUMENTATION: German
Downloads:
